Our Roofing Services | Hunter, KS
Whether it's a leaky pipe boot or a 50-square replacement, our Hunter crews have the training and equipment to handle it. Residential and commercial.
Roof Replacement
Full roof replacement starts with a complete tear-off down to the deck. We inspect every board for rot or soft spots. In Hunter, we find decking damage on about 30% of tear-offs. Damaged sections get replaced with CDX plywood before anything else goes on. Then we build up: ice and water shield in valleys and at eaves, synthetic underlayment across the full deck, new drip edge on every edge, starter strip, field shingles, hip and ridge caps, and ridge vent. Dumpster, permits, and cleanup included.
Get a Free Quote →Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Hunter homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →Storm Damage Repair
Not all storm damage qualifies for a full replacement. Hail might only damage one slope. Wind might only lift shingles on the windward side. We document exactly what's damaged and let the insurance company make the call. Honest documentation gets claims approved. Inflated claims get denied.
Get a Free Quote →New Roof Installation
We handle new construction from permits through final inspection. Our Hunter office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In Kansas, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Kansas's weather.
Get a Free Quote →Flat Roofing
Flat roofs don't actually drain themselves. That's the challenge. Water ponds, UV breaks down the membrane, and eventually it leaks. We install and repair TPO, PVC, EPDM, modified bitumen, and built-up roofing systems designed for zero-slope conditions in Hunter.
Get a Free Quote →Commercial Roofing
Need a commercial roof coating? Silicone coatings over existing TPO, EPDM, or metal extend life 10-15 years for a third of replacement cost. Not every roof qualifies. The existing membrane needs to be in decent shape. We core sample and moisture scan to verify before we recommend it.
Get a Free Quote →Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →Roof Inspection
After a storm, our inspection documents hail hits, wind damage, lifted shingles, and cracked components for your insurance claim. We take measurements, count damage per test square, and prepare a report your adjuster can use. Free for Hunter homeowners. We only charge if you hire us for the repair.
Get a Free Quote →Emergency Roof Repair
Emergency tarping is step one. Stop the water. We secure heavy-duty poly tarps over the damaged area using 2x4 nailer boards attached to the deck. Once the immediate threat is contained, we schedule the permanent repair within 48-72 hours.
Get a Free Quote →Skylight Installation
Skylight installation includes cutting the roof opening, framing a curb with doubled 2x lumber, installing the unit with factory sealant, and weaving the step flashing into the surrounding shingle courses. Interior work includes drywall framing and trim. We handle the full job in Hunter. Outside and inside.
Get a Free Quote →